$665.00
1000W RMS Class D Monoblock Subwoofer Amplifier

• High-Damping Class D Circuit with discrete control circuitry (U.S. Patent #6,441,685)
• Differential-Balanced Input Topology: 1 pair of inputs
• On-board Crossover: Fully-variable (40-200 Hz), selectable-slope (12 or 24 dB per octave) LP
• Preamp Output: 2-channel (independent active filter, parallel with amp filter or pass through)
• Bass EQ: Single-band parametric with variable boost up to +15dB and Remote Bass Option
• Infrasonic Filter: Fully-variable 24dB/octave from 15-60 Hz
• Output Polarity Reversal: Switch permits instant output polarity reversal
• Dual mono speaker output connections: Accept up to 8 AWG wire
• +12V and Ground connections: Accept 4 AWG wire (required)
• THD at Rated Power: <0.05% @ 4 ohm
• S/N Ratio: >95dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
• Damping Factor: >500 @ 4 ohm / 50 Hz
• Input Range: Switchable from 200mV-2V RMS to 800mV-8V RMS
• Dimensions (L x W x H): 19.70 in. x 9.25 in. x 2.36 in. (500 mm x 235 mm x 60 mm)